mission community sustainable building partners donate/volunteer learn more
Our Mision
tankless water heater
On-demand, tankless water heating
Heating water can account for as much as 30% of one's energy costs. Heating water only when it is needed, and heating the water with an energy-efficient gas- or propane-operated heater, can reduce this by 50%. learn more
open floorplan
Efficient floorplan
By replacing the formal dining room and formal living room with an spacious, open kitchen, dining area, and family room, 10-15% of the home's square footage can be eliminated. Additionally, keeping the bedroom sizes modest can save an additional 5% square footage.
geothermal
Geothermal-based heating and cooling
By sending a carrier fluid through underground pipes, a geothermal heat exchange system can extract heat from the ground during the winter to heat the home, or extract heat from the home during the summer to cool the home. This approach can save 30-70% in heating costs, and 20-50% in cooling costs, depending on geographic location. learn more
solar design
Passive solar design
Passive solar design involves properly shading the home when it's hot outside and allowing the sun's energy to enter the home when it's cold outside. This technique can enable a home to use 30% less energy for heating for heating and cooling. learn more
attic fan
Whole house ventilation
Whole house fans allow the home owner to minimize their use of an air conditioning system, thereby reducing air conditioning energy costs by as much as 30%. Additionally, whole house fans can improve indoor air quality by reducing humidity, odors, and smoke. learn more
low e
Low-emissivity (Low-E) argon-filled casement windows
Low-E, argon-filled windows significantly increase the R-value from value of 1 for a single pane of glass. Additionally, casement windows allow for maximum ventilation with a minimum total seam length. learn more
basement walls
Insulated basement wall system
Insulated precast concrete walls provide an insulated basement which lowers energy costs. These walls are manufactured off-site, which reduces jobsite waste. Additionally, no sprays or bituminous coatings are required to make the walls dampproof. learn more
cool roofing
Metal roofing with reflective coating
A cool roof reflects and emits the sun’s heat back to the sky instead of transferring it to the building below. A cool roof seeks to maximize both the solar reflectance and the thermal emittance. learn more
 
Evereco Hme Contact Us About Us